GNS3 configuration studied

more fun fun ga no work, nyoba nyoba GNS3, GNS3, short for Graphical Network Simulator 3.

    GNS3 is a graphical interface of a product called Dynagen with Dynamips as a core program that is able to emulate the CISCO IOS. GNS3 can emulate Cisco IOS with a throughput of 1000 packets per second, while the original has a throughput of CISCO Router hundreds to thousands times greater. Throughput parameter is not too important, more important is GNS3 CISCO IOS emulation capable of doing 100%.
    GNS3 is built with open source licenses by Jeremy Grossmann. Other developers involved is David Ruiz, Romain Lamaison, Aurelien Levesque, and Xavier Alt. Dynamips is being built by Christophe Fillot Dynagen by Greg Anuzelli. We should be grateful for their contributions.
Many things can we get from this GNS3, including:

    Simply using a fruit or a laptop computer, the computer or laptop that we use his own
    Being able to create a graphical networks from simple to complex
    Capable of simulating the PC / Computer
    Capable of simulating real Cisco routers, so that we can learn about routing with Cisco routers without the need to purchase
    Very useful for network setup. That is, we setup the network using this simulator, only after thoroughly tested can be implemented into a real network.
    Easier for us who want to learn about networking, TCP / IP, subnetting, routing, etc. that has to do with the network.
    Cisco helps us in deep, let alone who want to achieve CCNA and CCNP certification
Download GNS3. To get the file, visit http://gns3.net icon and click Download.
Download Cisco IOS Image. To obtain a Cisco IOS Image, very much on the internet. In this tutorial file provided by Cisco IOS Image to a router CISCO 2600 model

    http://www.ziddu.com/download/16073567/c2600-js-mz.html
GNS3 support for Cisco IOS Cisco router models of the following:

    1710
    1720
    1721
    1750
    1751
    1760
    2610
    2610XM
    2611
    2611XM
    2620
    2620XM
    2621
    2621XM
    2650XM
    2651XM
    2691
    3620
    3640
    3660
    3725
    3745
    7200
first of all install the GNS3 application on your computer Ketawa way how to install it http://devilzc0de.org/forum/thread-4969.html
then check the dynamips in the edit menu then preferences
Uploaded with ImageShack.us

CISCO IOS then input to the menu EDIT - IOS IMAGES AND hypervisors do load the iso that we downloaded earlier
Uploaded with ImageShack.us

then make a simple topology as shown below .. green dot on the cable is a sign that is connected, if red is not yet connected to the network
Uploaded with ImageShack.us

Congratulations you have successfully configured, the next step is that we have menconfigurasi router runing on the topology of the laugh

refrensi http://www.youtube.com/watch?v=aUIxdSQ_BX4

Credit By: arie foor